Constant Temperature Humidity Test Chamber Dual layer Reliability Testing
Sanwood is engaged in develop, production and sale environmental reliability test chambers and lab test equipment since 1995. The Custom Constant Temperature Humidity Test Chamber, is a customized climatic chamber / environmental chamber of Sanwood's temperature humidity test chamber series. It's simulating products under the environment condition of temperature and humidity combination (high and low temperature operation & storage, temperature cycle, high temperature and high humidity, low temperature and humidity and condensation test, etc.), check whether the adaptability and characteristics of the product itself have changed.
Main custom features are:
1. Double layer design, each test room working volume and internal size is the same 600x600x600mm
2. Each test room temperature separate control
3. Separate refrigeration system.
4. Cable ports in the side of the chambers, diameter 50mm.
General features:
1. Evaporator no frosting under longtime Low temperature and low humidity running.
2. Enery-saving design - Automatic control system refrigerant demand save electricity above 30%
3. High heat load tested samples test environment
4. Harsh environment simulation, 95℃ 95% high temperature high humidity, and 20℃, 5% low temperature low humidity is available
5. Friendly HMI - the controller has multi-language selection: Chinese, English, Russian, Korean, Japanese, German multilingual language.
Main standards comply: IEC60068-2, IEC62619, UN38.3, UL1973
Technical specification:
| Model | SMC-216-CC-2 |
| Temperature range | -30℃～150℃ |
| Temperature fluctuation | ±0.5℃ |
| Cooling rate | 150.0℃～-20.0℃ 1.0～2.0℃/min |
| Heating rate | 3.0～5.0℃/min |
| Temperature uniformity | ±1.5℃ (-40.0℃～100.0℃) ±2.0℃ (100.1℃～150.0℃) |
| Humidity range | 15% ~ 98%RH |
| Humidity uniformity | ±2.0%RH |
| Internal material | SUS304 stainless steel(1.2mm) |
| External material | cold-rolled plate(1.2mm),powder coating |
| Heat insulation | polyurethane foam(100mm)+glass wool(10mm) |
| Fan | Centrifugal fan(Impeller Fan) |
| Refrigeration compressor | hermetic compressor |
| Cooling mode | air cooling or water cooling |
| Refrigerant | R404A,R23 |
| Evaporator | finned-tube exchanger |
| Heater | nickel chrome strip heater |
| Interior(mm) W*H*D | 600x600x600 |
| Working volume | 432L (2x216L) |
| Exterior(mm) W*H*D | About 800x1870x1315 |
| Working Temperature | +5 ~ 35℃ |
| Power supply | 220V/AC 50/60Hz single phase |
| Controller | Standard SANWOOD touch screen, programmable |
Product Catalog:
Temperature and Humidity Test Chamber .pdf
Product Tags:
|
|
Custom Constant Temperature Humidity Chamber Dual layer Reliability Testing Images
|
